STng Backbone Kit
This is a larger backbone kit which contains: Two Terminators, Power Cable, 4 x T-Piece Connectors, 20m Backbone Cable, 2 x 5m Backbone Cable
In a SeaTalkng installation, a backbone cable runs through the length of the boat.
Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed.
Cables and connectors are colour-coded for easy system identification and have quick connect, waterproof plugs and sockets.
Raymarine STng Backbone Kit
Raymarine’s proprietary cable system for use in NMEA 2000 networks. The design provides two advantages. First, the connector collars are retained on the product which allows for a smaller cable diameter making installations easier. More importantly, the cable can include a sixth wire which allows for backward compatibility with SeaTalk1 equipment.